stringing

[Kdivad@AOL.COM]

In a message dated Tue, 06 Aug 2002 14:57:46 +0200, Richard.Brekne@grieg.uib.no writes:

> 
> 
> One mistake I see time and time again with these string cans
> (I mean the standard metal rounds)is that folks will try and
> find the outside end of the string coil and run that through
> the leader hole. Guarrenteed muck up. The end of the string
> that should go through the hole in the can has that little
> pressed stamp tin thingy.  
> 
> Other then that I have this little rack I have that I hang
> the can on so it stays in one place while I pull string out.
> 
> I am by nooooo means a speed stringer tho.
> 
> RicB

Oh yes, there are many things that can go wrong with a coil of piano wire.

David Koelzer
Vintage Pianos
DFW