Singing Samick

[jolly roger]

---------------------- multipart/alternative attachment

Hi David,
                  that was 2yrs ago, how time flies.  ( tepus fugit )
But I think it is on the Journal disc.

Roger

At 11:37 PM 8/22/02 -0700, you wrote:

>>Roger,
>>
>>You had an article on steaming in a recent Journal, right?  I'm 
>>considering trying it on a 1  year old Yamaha G2 that has already begun 
>>breaking strings in the treble....hotel lounge with big bands and 
>>probably no monitor for the piano...
>>
>>David I.
>>
>>
>>
>>
>>
>>----- Original message ---------------------------------------->
>>From: jolly roger <<mailto:baldyam@sk.sympatico.ca>baldyam@sk.sympatico.ca>
>>To: <<mailto:pianotech@ptg.org>pianotech@ptg.org>
>>Received: Fri, 23 Aug 2002 00:28:02 -0500
>>Subject: Re: Singing Samick
>>
>>
>>
>>3. Anything else to try? (Bridge and everything else 'looks' fine.)
>>
>>Alan Barnard
>
>
>
>Hi Alan,
>               Try tapping the bridge pins, they are probably are probably 
> loose. Use a hammer shank or a pin set punch, just be careful with the hammer.
>The rock hard hammers need deep needling on the shoulders, or a generous 
>dose of steam. if you are inexperienced at voicing, find some one to help you.
>
>Regards Roger


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d2/92/57/c6/attachment.htm

---------------------- multipart/alternative attachment--