On Wed, 18 Dec 2002 17:21:40 -0800 David Love <davidlovepianos@earthlink.net> wrote: > Get two blocks of wood measuring exactly 7" > high. Place > them on the soundboard at opposite edges of > whatever part of the piano you want > to measure. Put a straight edge across > the top of the two blocks and at a > point midway between the blocks, measure the > distance from the bottom of the > straightedge to the soundboard. Subtract > that number from 7" and the > amount left over is the amount of crown. > > David Love > Or, as Ron N has pointed out before, the difference in thickness of the board at the measuring point and at the points where the blocks are located. Phil F
This PTG archive page provided courtesy of Moy Piano Service, LLC