---------------------- multipart/alternative attachment Del writes> > > The wood moisture has to be within bounds. We forget the importance of wood > moisture content on the adhesive when we blithely talk about taking wood > down to 4% for compression-crowning. Most adhesives work best on wood > between approximately 7% and 9% MC. Below 6% the wood starts absorbing > enough solvent -- usually water -- from the adhesive to start affecting the > adhesive bond. At 4% things get really dicey. > . Hi Del Are you referring to all glues under the aformentioned dry conditions. Out o f curiosity what is your glue of choice for rib bond and board to rim joint in your rebellying systemology ? Am I understanding you to say that this heated press is what you are using? or not? Dale Erwin ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d8/3f/b7/9e/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC