This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment ----- Original Message -----=20 From: Erwinspiano@aol.com=20 To: pianotech@ptg.org=20 Sent: December 30, 2002 5:43 PM Subject: Re: Knabe Grand In a message dated 12/30/2002 3:37:41 PM Pacific Standard Time, = mfarrel2@tampabay.rr.com writes: Subj: Re: Knabe Grand=20 Date: 12/30/2002 3:37:41 PM Pacific Standard Time From: mfarrel2@tampabay.rr.com Reply-to: pianotech@ptg.org To: pianotech@ptg.org Sent from the Internet=20 Hey Terry This sounds possibly like a drill and plug with delignit 1/2" = plugs kinda of job? Especially if the open faced block is angled or has = more than one flange shelf like some Chickerings. Dale I sure hope not. I can't stand the look of all those plugs in an open = faced block. Especially when doing the job right is not all that = difficult. Even the angled Chickerings aren't all that bad, but the = Knabe block is flat and relatively easy duplicate and replace. We've = done several and none of them presented all that much of a challange. = (Don't forget Terry has at least some experience with wooden boats -- = ain't a straight line in any of them.) And those open-face blocks sure = look beautiful when they are all finished. Not to mention how = beautifully they tune. Del ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fb/e6/78/dd/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC