Yamaha upright hammer spring thread

[Tom Driscoll]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment

  ----- Original Message -----=20
  From: PNHISTIC1@AOL.COM=20
  To: pianotech@ptg.org=20
  Sent: Sunday, February 10, 2002 7:44 AM
  Subject: Yamaha upright hammer spring thread


  Hello list,=20

  I did not have any of this type of thread available, so I found some =
fairly hefty sewing thread, braided it as best I could for strength, and =
repaired the broken ones with it. =20
  Dave Stahl=20
      Dave,=20
       Yamaha  has a replacement for this piano, as long as it is not an =
 evil grey market piano. It comes with the cord wrapped around a =
cardboard spool that will give you the exact length needed when cut down =
it's length. I posted a technique for this repair which I've improved =
after added suggestions from our esteemed list. This job can be done in =
less than two hours. Search the archives. You can also buy the silk cord =
by the yard from Schaff .   Tom Driscoll

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/6d/30/fa/ef/attachment.htm

---------------------- multipart/alternative attachment--