David, If you want good really graphite pencil take the Renner one. At last the ones they sell in Europe is very efficient. I tried different pencils but none where exactly as graphite sticks. And yes, talc is better under the key frame. Isaac OLEG > -----Message d'origine----- > De : owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]De la part > de Dave Nereson > Envoyé : jeudi 14 février 2002 02:15 > À : pianotech@ptg.org > Objet : graphite > > > On this graphite thing -- everybody talks about it like it's > anthrax or > something, but I don't find the stuff all that offensive. Not powdered > graphite, anyhow. Graphite grease, yes -- that stuff is nasty because it > collects dust and gums up, slowing things down, rather than lubricating. > Technicians used it quite a bit in decades past and is now a no-no. (I > think that's the most commonly found gunk in repetition lever spring slots > of older grands). > But the powdered graphite I don't see as all that bad a > substance, other > than being difficult to wipe off your fingers. Isn't that what piano > manufacturers used to put on the tops and tenders of jacks, on top of > repetition levers, on sliding surfaces like the hardwood plugs under the > glide bolts of grand actions and on the side of the action frame where it > contacts the shift return spring, and sometimes on dags and the back edge > of the back rail, and in certain spring grooves, and sometimes on sliding > surfaces of wooden trapwork levers, etc.?? > I don't use it much, except occasionally under the glide bolts if they > squeak when using the soft pedal (una corda). And on upright > damper levers, > I'll pop the spring out, polish it, brush the felt clean with a > toothbrush, > then lube the slot with pencil lead, which is essentially graphite, I > believe. I mean, as long as it's not graphite grease, and you don't lick > your fingers to dispose of the excess, what's wrong with > --David Nereson, RPT, Denver > >
This PTG archive page provided courtesy of Moy Piano Service, LLC