Was shim pins/now crack options

[Tvak@AOL.COM]

In a message dated 2/18/02 8:33:15 AM, Wimblees@AOL.COM writes:

<< You want to 
fill the hole about half way up with an epoxy, and drive the pin ion. The 
epoxy then has to fine a way out, and the way is into the cracks, and around 
the pin.  >>

The pinblock on this piano has holes that go all the way through to the 
bottom.  Wouldn't the epoxy just be pushed downward, and perhaps out of the 
pinblock?

Tom Sivk