Steinway hinges

[Erwinspiano@AOL.COM]

---------------------- multipart/alternative attachment
In a message dated 2/20/2002 4:49:01 PM Pacific Standard Time, 
Erwinspiano@AOL.COM writes:


> 
> >> Subj:Steinway hinges 
>> Date:2/19/2002 6:02:29 PM Pacific Standard Time
>> From:<A HREF="mailto:mkurta@adelphia.net">mkurta@adelphia.net</A>
>> Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
>> To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
>> Sent from the Internet 
>> 
>>     Or have the Schaff ones  plated...Dale>>>>>>>
>> 
>> Looking for a pair of lid hinges for a Steinway Model M.  2" wide, bent 
>> butt.  Identical to Schaff # 2771 but must be nickel plated.  Any out 
>> there?  Mike Kurta, RPT.    <A HREF="mailto:mkurta@adelphia.net">mkurta@adelphia</A>
>> 
> 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c5/44/f8/e3/attachment.htm

---------------------- multipart/alternative attachment--