Terry, Thanks for the info. I tried to contact Carl at the email you gave but it was undeliverable. Any other thoughts? Bill SLC, UT ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: <pianotech@ptg.org> Sent: Wednesday, February 27, 2002 6:38 PM Subject: Re: Key Leveling Devices > I had tried a couple different methods and was not happy with my key leveling results (I think one of them was an expensive Jaras thing). A few months ago I purchased a key leveling system from Carl Meyer. It is very simple and works great - wait, better than great - it's excellent. I have used it many times now and my results are great and my speed at the task has improved greatly. Contact Carl at: cmpiano@home.com > > Terry Farrell > > ----- Original Message ----- > From: "Kelly & Bill" <kellybill_m@hotmail.com> > To: "Pianotech" <pianotech@ptg.org> > Sent: Wednesday, February 27, 2002 6:36 PM > Subject: Key Leveling Devices > > > List, > > I am curious to know what everyones favorite method (tool) for doing a complete key-leveling job is. I am new to the sport and would like input on the best tool for the job. So far the only methods I'm aware of are: aluminum straight edge, the Jaras tool, and the Sciortino tool. Are there others? > > Thanks for the input > > William R. Monroe > Salt Lake City, UT > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC