This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I've never used CA, but you can clamp them together and saw through the = joint and the saw kerf will add relief space. They gotta stop warping = sometime. Ken Jankura ----- Original Message -----=20 From: PIANO2NR@aol.com=20 To: pianotech@ptg.org=20 Sent: Wednesday, October 02, 2002 7:46 PM Subject: Kimball w/warped keys 12 year old Kimball console was ok last December but after going = through humid summer, at least a dozen keys are warped and rubbing each = other. I ran into this a number of years ago on another Kimball and = they replaced the keyboard under warranty. I was thinking of = straightening the keys by dampening and heating but they seem a little = "rubbery" and I don't think they will stay straight. Has anyone tried = applying thin CA glue to the keys to stiffen them and make them less = likely to warp again? Thanks, Randy Mangus=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/cc/cb/4c/2d/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC