Well I certainly have taken a flat bladed screwdriver to a grinder...I would imagine a whetstone could do it more elegantly. So Joe, how do you sharpen your phillips head screwdrivers? David Ilvedson ----- Original message ----------------------------------------> From: Joseph Garrett <joegarrett@earthlink.net> To: <pianotech@ptg.org> Received: Mon, 7 Oct 2002 19:40:35 -0700 Subject: Dull Screwdriver! Reprise >Well now, there, then. You've all gotten a great deal of mileage out of this >thread. And, as usual, the subject has gone several directions. (This is a >good thing<G>) However, several of you have mentioned that screwdrivers wear >out and all they are good for is pry bars, etc. None of you have asked the >obvious question, which I assume you don't do, and that is: How do you >sharpen a screwdriver. As an aside, I'm still using the same screwdrivers I >purchased, inherited & found over the past 30+ years. They are not worn out! >If there are those of you, who do know how to sharpen a screwdriver, then >jump right in here.<G> >Best Regards, >Joe Garrett, RPT, (Oregon) >Been There, Didn't Like It, So I'm Here To Stay! [G} >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC