Hello, A have a turning stone on a grinder (TORMEK) intended to sharpen all kind of chisels and tools, and I use it. But the X screwdrivers I am not happy with the results, and the flat ones not really easy to shape. So I'd appreciate data ! Isaac O. > -----Message d'origine----- > De : pianotech-bounces@ptg.org > [mailto:pianotech-bounces@ptg.org]De la > part de Joseph Garrett > Envoyé : mardi 8 octobre 2002 04:41 > À : pianotech@ptg.org > Objet : Dull Screwdriver! Reprise > > > Well now, there, then. You've all gotten a great deal of > mileage out of this > thread. And, as usual, the subject has gone several > directions. (This is a > good thing<G>) However, several of you have mentioned that > screwdrivers wear > out and all they are good for is pry bars, etc. None of you > have asked the > obvious question, which I assume you don't do, and that is: > How do you > sharpen a screwdriver. As an aside, I'm still using the > same screwdrivers I > purchased, inherited & found over the past 30+ years. They > are not worn out! > If there are those of you, who do know how to sharpen a > screwdriver, then > jump right in here.<G> > Best Regards, > Joe Garrett, RPT, (Oregon) > > Been There, Didn't Like It, So I'm Here To Stay! [G} > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC