Split Case

[Joseph Garrett]

Hazen,
Most "small grands" have a thin rim, so that sort of damage occurs more than
we would like. My repair for such damage is this. I bored vertically down
into the rim and inserted pinblock plug stock, to just slightly deeper than
the appropriate screws depth. Then, I glued a 1/4" laminate square to the
inside of the rim, (one for each hinge area). The laminate square had
beveled edges and was sealed and finished to match the case.
Hope this helps,
Best Regards,
Joe Garrett, RPT, (Oregon)

Been There, Didn't Like It, So I'm Here To Stay! [G}