Young Chang damper tray removal

[David Ilvedson]

This is in the archives...but:

It's been awhile...remove screws into big flanges on which the tray rotates.  pull tray out towards you and with a long screwdriver you can get access from above down through the strings into the blocks screwed down into the top of the tray.  Remove 2 screws per block and the tray will come out.  Repin or replace (you will need parts from Young Chang) and re-install...

David I.



----- Original message ---------------------------------------->
From: Farrell <mfarrel2@tampabay.rr.com>
To: <pianotech@ptg.org>
Received: Mon, 14 Oct 2002 11:44:47 -0400
Subject: Young Chang damper tray removal

>Have a Young Chang 150 cm grand in a church, damper tray hinges on 3 flanges,
>center pins have fallen out of flanges. It appears the only way to remove the flanges
>and the tray requires separating all the leaded damper blocks from the damper wires and
>the
>Thank you.

>Terry Farrell
>

>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives