Gordon, I've had success replacing whole sets of springs in original rails. Replacement springs are available from Schaff, part numbers 519A, 519B and 3777. Jerry Gravina, RPT Babylon, NY At 09:18 AM 10/14/2002 -0500, you wrote: >List. I need information on securing a new hammer spring rail for a >Baldwin-Howard, Spinet, drop action, with stickers. Some springs are >broken, others are all bent, in general hammers won't return. I >found in the archives a discussion between John Ross, Newton Hunt, >Patrick Draine and Clyde Hollinger, Aug 1999, a source of Pratt Winn >and Wade Boggs, where John Ross suggests they will build a new one if >one were to send them the old one. They would duplicate it with a >replacement rail for a reasonable price. >Does anyone have further information on this with an address, phone >number, e-mail address, etc. >Thank you all for the pending help. Regards, Gordon Holley, Goshen, >IN >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC