Hammer Spring Rail Replacement

[Gordon Holley]

Thanks Jerry for the assistance, do appreciate the help.
Regards, Gordon
On 15 Oct 2002 at 6:54, G GRAVINA wrote:

> Gordon,
> 
> I've had success replacing whole sets of springs in original 
> rails.  Replacement springs are available from Schaff, part numbers 519A, 
> 519B and 3777.
> 
> Jerry Gravina, RPT
> Babylon, NY
> 
>    At 09:18 AM 10/14/2002 -0500, you wrote:
> >List.  I need information on securing a new hammer spring rail for a
> >Baldwin-Howard, Spinet, drop action, with stickers.  Some springs are
> >broken, others are all bent, in general hammers won't return.  I
> >found in the archives a discussion between John Ross, Newton Hunt,
> >Patrick Draine and Clyde Hollinger, Aug 1999, a source of Pratt Winn
> >and Wade Boggs, where John Ross suggests they will build a new one if
> >one were to send them the old one.  They would duplicate it with a
> >replacement rail for a reasonable price.
> >Does anyone have further information on this with an address, phone
> >number, e-mail address, etc.
> >Thank you all for the pending help.  Regards, Gordon Holley, Goshen,
> >IN
> >_______________________________________________
> >pianotech list info: https://www.moypiano.com/resources/#archives
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives