Removing Piano Sides, amendment<G>

Joseph Garrett joegarrett@earthlink.net
Wed, 16 Oct 2002 22:52:04 -0700


I neglected to say that I TRIED the chisel routine on that olde upright. It
wouldn't budge! I was using 4" wide Brick Chisels, reshaped and sharpened.
To no avail. It was the 10" Porter-Cable or nothing, in that circumstance.
Who says Hide Glue isn't strong!!!!<G> I wailed on that puppy with my 3#
tuning pin driving sledge. Not a wiggle. So, if'n the chisels don't work
there's another way.
Best Regards,
Joe Garrett, RPT, (Oregon)

Been There, Didn't Like It, So I'm Here To Stay! [G}


This PTG archive page provided courtesy of Moy Piano Service, LLC