I'll likely be needing a grand hammer hanging jig soon. I've heard that the Spurlock jig is real good, and I have heard that perhaps the Renner jig is better. Comments? Opinions? Experiences? Thanks. Terry Farrell ----- Original Message ----- From: "Richard Brekne" <Richard.Brekne@grieg.uib.no> To: "PTG" <pianotech@ptg.org> Sent: Sunday, October 20, 2002 6:00 PM Subject: Hang'n dem Hamers > Hi list. > > Perhaps you all remember we were on a bout this just a few > weeks ago, and jokingly I suggested to Roger that he bring > over the Spurlock jig he recommended to me on that thread. > Well, on thursday evening just before we opened, I was in > putting the finishing touches on a piano I was to use the > next day, and in comes Roger.... bearing.... the Spurlock > Jig !... I of course purchased it immediatly, and he was > kind enough through in a tailing jig (also from Spurlock) as > well. > > Just goes to prove, this list....what a great bunch of guys > and gals. Ok ok... so we spat it out from time to time... > but almost all of us see past all that and in the end are > able to show each other friendship, advice, help, and > sometime just plain unabashed kindness. > > Thanks Roger. :) > > -- > Richard Brekne > RPT, N.P.T.F. > UiB, Bergen, Norway > mailto:rbrekne@broadpark.no > http://home.broadpark.no/~rbrekne/ricmain.html > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC