---------------------- multipart/alternative attachment In a message dated 10/21/02 7:30:08 PM Central Daylight Time, pianotuna@accesscomm.ca writes: > Hi David, > > The shank bending pliers that I recommend the incandescent dimmer switch > for (NOT MOTOR CONTROLLER) draw 150 watts. I agree they should not be used > with a heat gun--but for different reasons. You may well burn out the motor > on a heat gun with such a dimmer, which uses a silcon controlled rectifier > to switch the A.C. into pulse D.C. and reduces the voltage by reducing the > number of pulses. > > A side benefit of using an SCR on regular incandesent bulbs is that they > will last for years longer with pulse DC rather than A.C. > > Thanks for the scientifics. David Koelzer Vintage Pianos DFW ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/38/f2/0c/d7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC