---------------------- multipart/alternative attachment In a message dated 10/23/02 7:27:12 AM Central Daylight Time, mfarrel2@tampabay.rr.com writes: > > Lots of good suggestions on centering a hole, but Ron is the only one that > touched on my real concern. I like the Bolduc blocks, but I have a general > concern about using them on a no-bushing plate. I was planning on using > (for the first time) a Delignit block on this M&H upright. > > Terry you must have missed my earlier post about punching an off center hole. David Koelzer Vintage Pianos DFW ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/14/70/e6/6c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC