Pinblock Drilling Centering

HazenBannister@cs.com HazenBannister@cs.com
Wed, 23 Oct 2002 23:34:00 EDT


---------------------- multipart/alternative attachment
In a message dated 10/23/2002 11:02:32 AM Eastern Daylight Time, 
Kdivad@aol.com writes:


> 
> >> Lots of good ideas, but why not just use a drift punch of the appropriate 
>> size? A whole set (in 1/64" increments) shouldn't run more than $10 or $15 
>> (it's been a while since I bought any--but still...).
>> 
>> Del
>> 
> 
> 

Hi,
 This is the method I use,and have never had a problem.
Best,
Hazen Bannister

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/05/a3/33/c1/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC