This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Dunno about this one, but I had to completely remove the stop screw and = the leather pad it hit in order to get enough shift in a brand new = Boston!=20 Is Steinway watching there specs and tolerances? Alan ----- Original Message -----=20 From: "Avery Todd" <avery@ev1.net> To: <pianotech@ptg.org> Sent: Thursday, October 24, 2002 6:36 PM Subject: Shift Problems > List, >=20 > I ran into a new problem today I've never had before on a > Steinway 'B'. >=20 > The piano is one Abbey Simon uses in his studio and he's been > complaining that there wasn't enough difference when he uses the > "soft" pedal and there's too much noise when shifting. >=20 > While working on it today, I discovered that the noise is because > the keyframe is hitting the cheek block instead of the stop screw > (wood hitting wood). >=20 > With the block out, the action travelled a good bit further so I > adjusted the screw to stop the noise. But now, as it was before, > the action isn't travelling far enough to clear the left string, > which was the basic problem to begin with (except for the noise). >=20 > I don't see anything I can do to make the action shift further > except reduce the thickness of the cheek block. The hammers are > very well aligned to the strings, so that's not the problem. >=20 > Any ideas I've overlooked? The piano is only about 1 yr. old. The > 5 yr. old one shifts much further and is fine. Thanks for any > ideas. >=20 > Avery >=20 >=20 >=20 >=20 > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b1/3e/1b/d0/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC