Waxpaper. Left in place. Thump --- Farrell <mfarrel2@tampabay.rr.com> wrote: > I would be interested in what type of release > agent/material folks use on the plate flange when > epoxy-fitting the block to the flange. You don't > want to have to undo cast iron epoxied to hard > maple! > > Terry Farrell > > ----- Original Message ----- > From: "Phillip Ford" <fordpiano@earthlink.net> > To: <pianotech@ptg.org> > Sent: Thursday, October 24, 2002 10:22 PM > Subject: Marking plate for pinblock fitting > > > > I would be interested in the stuff that people are > using to mark or coat the > > plate flange when fitting a pinblock. > > > > Phil F > > > > > > > > Phillip Ford > > Piano Service & Restoration > > 1777 Yosemite Ave - 215 > > San Francisco, CA 94124 > > _______________________________________________ > > pianotech list info: > https://www.moypiano.com/resources/#archives > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives __________________________________________________ Do you Yahoo!? Y! Web Hosting - Let the expert host your web site http://webhosting.yahoo.com/
This PTG archive page provided courtesy of Moy Piano Service, LLC