Pinblock Drilling Centering

JIMRPT@aol.com JIMRPT@aol.com
Fri, 25 Oct 2002 13:02:01 EDT


In a message dated 25/10/02 12:00:57 PM, mfarrel2@tampabay.rr.com writes:

<<  This procedure works extremely well on a non-rock, a.k.a. 

> delignit/falconwood,etc., block...I've never tried it on the rocks.


I thought Delignit was considered one of the harder (rock-like) pinblocks.

 >>

Hmmm...I see where I could cause confusion here so let me reword this.....

This procedure works extremely well on a non-rock block, I've never tried it 
on the rocks.............a.k.a. delignit/falconwood,etc., ...

This PTG archive page provided courtesy of Moy Piano Service, LLC