Hello, It's the other direction, Del (hammers too far at the left probably) regards. Isaac O Zoreil > -----Message d'origine----- > De : pianotech-bounces@ptg.org > [mailto:pianotech-bounces@ptg.org]De la > part de Delwin D Fandrich > Envoyé : vendredi 25 octobre 2002 10:47 > À : Pianotech > Objet : Re: Shift Problems > > > > ----- Original Message ----- > From: "Avery Todd" <avery@ev1.net> > To: <pianotech@ptg.org> > Sent: October 24, 2002 4:36 PM > Subject: Shift Problems > > > > > > I don't see anything I can do to make the action shift further > > except reduce the thickness of the cheek block. The hammers are > > very well aligned to the strings, so that's not the problem. > > > Ah, but how are the hammershanks aligned to the wippens. > This would not be > the first time an action got out of NY with the > hammershanks all aligned > overly far to one side or the other. > > If the shanks are generally aligned too far to toward the > bass--check by > looking straight down and determining how they line up with > the rebound > felts and the wippen flanges--you might be able to reduce > the width of the > action shift stop block and re-align the hammers to the > strings thereby > establishing the correct shift. > > It's a long shot, but before you start carving and cutting > you might check. > During the 70s and 80s I probably did this to half a dozen > or so S&S grands. > Factory story? It can't happen. > > Del > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC