I'll bet this home made too would be more practical in fact. The little strain gauges have a needle that me be rest to zero between measures if you want to be really accurate. And their arm is very thin, a home made could have a shape better adapted. And they are to be handled with care. And so on... IZOREIL OLEG > -----Message d'origine----- > De : pianotech-bounces@ptg.org > [mailto:pianotech-bounces@ptg.org]De la > part de Ron Nossaman > Envoye : samedi 26 octobre 2002 00:31 > A : Pianotech > Objet : RE: Spring behavior > > > > >I plan on purchasing a Strain Gage soon to actually > measure the difference > >and then be able to calibrate the > >tension out of the piano. This pre-tensioning is proposed > for wippen > >assist spring tension as well. I hope > >to reduce the time needed to afine-tune the tension once > installed and > >gain the best spring curvature with visual > >inspection. > > Hi Jon, > A strain gage is probably overkill. You can set up a lever > arm with a > sliding weight and deflection pointer that will most likely > tell you all > you need to know with stuff you have lying around in the > shop already. > Calibrate it with your little electronic scale (which is > already a mounted > and calibrated strain gage). Just a thought. > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC