Antares wrote: (snip)... > We bang on the piano (on the wooden beam that is situated > against the iron > frame and directly over the keyboard, what is the name? > please) and listen > for a rattle..... > If we hear a rattle we put one finger lightly on each bolt, > ubtil we have > found the one that causes the rattle. > Tighten bolt, end of story. > > > > friendly greetings > from > > Antares, I think you might have to bang a little less if you were to bang under the key bed but from below. You would then just have to tap with your fist and would hear the rattle immediately if there was a gap between one of the glides. Marcel Carey, Sherbrooke QC
This PTG archive page provided courtesy of Moy Piano Service, LLC