Bridge pressure bar

[Greg Newell]

---------------------- multipart/mixed attachment
I may have missed this but why was it scrapped? Could you describe the kind 
of sound it had before you did?

Greg Newell


At 03:31 PM 4/15/2003, you wrote:

>    > "How interesting. A modification of the torsion box. Are the two
>outside skins a single ply of wood or are they laminated? As shown it
>appears that it would be considerably stiffer around the parameter than I
>would like, but otherwise does have some potential. Why is it cut away? Is
>this the way it was actually installed? Or is this for demonstration
>purposes?"
>
>The outer skins are single ply. I cut it away when I scrapped the piano; I
>just cut out the treble section, frame and all, to keep as a model. BTW, the
>piano was designed so that soundboard removal could be achieved without the
>need to destring.
>
>Regards
>Alan Forsyth
>Edinburgh
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives

Greg Newell
mailto:gnewell@ameritech.net 

---------------------- multipart/mixed attachment--