When we build aircraft wings and parts we use a hot wire to cut it. Transformer and pianowire should work nicely. Rich David Love wrote: > > What's the best way to get a nice clean cut with that stuff. > > David Love > davidlovepianos@earthlink.net > > ----- Original Message ----- > From: > To: pianotech@ptg.org > Sent: 8/7/2003 4:17:53 AM > Subject: Re: Accoustic Foam > > Or call Markertek direct @ (800) 522-2025. > They sell the 3 1/2" accoustical/baffle foam for about $50 (3'x 5' sheet), > enough to do 2 medium size grands. > Tom Servinsky > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC