---------------------- multipart/alternative attachment >Ron: > >What is the working time for the Titebond Extend. Enough time for one >person to clamp up a soundboard including the cutoff bar? > >David Love >davidlovepianos@earthlink.net David, The cutoff bar is already fitted to the case separately. The time required is that for the application of glue to the ribs and clamping the panel down onto the ribs (this is all done the right way up, and not inverted as it is when a shaped caul is involved and either go bars or pressurised air employed). The sound board does not extend out over the cut-off area. This area will be filled with a piece of structural ply which is veneered top and bottom with Rock Maple. Ron O. -- OVERS PIANOS - SYDNEY Grand Piano Manufacturers _______________________ Web http://overspianos.com.au mailto:ron@overspianos.com.au _______________________ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/dd/21/5d/3f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC