When you do a board this way, how do you set your downbearing? Thanks. Terry Farrell ----- Original Message ----- From: <Erwinspiano@aol.com> To: <pianotech@ptg.org> Sent: Saturday, January 04, 2003 10:24 PM Subject: Re: Restored Baldwin out the door >> > >> I had the pleasure of making the Baldwin client cry today... > >> that is with joy. Her 90 year old mother wass there to see and hear the > >> piano she'd suffered with teaching piano lessons low those 25 years. I was > >> very gratified & honored at the response. > > Interesting post Del as I believe this model is the Balwin C > model you mention in the post at the bottom of this one. Shocked may have > been the wrong choice of words describing the shallow rib depth but ribs 1 > thru 4 were 24mm wide and 14,15.5,18,&18mm deep. compared to the Baldwin R > model(same length 5ft. 8") > 18,21,22,24mm. Same width. I beefed up the bottom 7 ribs in depth. SNIP
This PTG archive page provided courtesy of Moy Piano Service, LLC