YC blow distance

[Keith Roberts]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Uh..1.81 inches. The only 6" metal ruler I found was 10ths and 100ths on =
one side and 32nd and 64ths on the other. I'll find a decent mm ruler =
around here yet.
Thanks Roger
  ----- Original Message -----=20
  From: Roger Jolly=20
  To: Pianotech=20
  Sent: Monday, January 06, 2003 11:09 PM
  Subject: Re: YC blow distance


  If the brackets have been replaced, it should regulate with 46mm blow =
at 10mm dip.

  Regards Roger


  At 10:39 PM 1/6/2003 -0800, you wrote:

    What's the specified blow distance for a Young Chang grand. This one =
is a G150. 1991. It was adjusted to the max to compensate for the =
expanding action brackets.=20
    Thanks=20
    Keith R

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f6/2e/68/aa/attachment.htm

---------------------- multipart/alternative attachment--