---------------------- multipart/alternative attachment I have a question for you folks who are well aquainted with different properties of wood... what mixes and what doesnt. If one was to cut out a section of the key to put in an assembly like my keymagnet assembly, what king of wood type would be a good choice to use for the assembly. It needs to be hard enough to facilitate a center pin that holds the magnet shank. [Image] Thanks RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html http://www.hf.uib.no/grieg/personer/cv_RB.html ---------------------- multipart/alternative attachment --------------998EF417476373B84414FB2C An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/64/6b/ac/9d/attachment.htm --------------998EF417476373B84414FB2C A non-text attachment was scrubbed... Name: C:\\DOCUME~1\\RICHAR~1\\LOCALS~1\\Temp\\nsmail08.jpeg Type: image/jpeg Size: 12973 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/8f/8f/07/eb/nsmail08.jpeg --------------998EF417476373B84414FB2C-- ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC