Hello, that's it, using pen marks or masking tape, the difference may be small and difficult to measure precisely, but we can use the pitch of the string to assume the tension. Isaac OLEG Entretien et réparation de pianos. PianoTech 17 rue de Choisy 94400 VITRY sur SEINE FRANCE tel : 033 01 47 18 06 98 fax : 033 01 47 18 06 90 cell: 06 60 42 58 77 > -----Message d'origine----- > De : pianotech-bounces@ptg.org > [mailto:pianotech-bounces@ptg.org]De la > part de Cy Shuster > Envoyé : vendredi 18 juillet 2003 16:28 > À : Pianotech > Objet : Re: A string's treatment > > > Hello, Isaac, > > Thanks for the translation. Let me make sure I understand > it. Is this > correct: the experiment is to measure the string without > tension, then apply > 800 newtons for six months or a year, then remove the > tension and measure > again? > > Merci, > > --Cy Shuster-- > Rochester, MN > > ----- Original Message ----- > From: "Isaac sur Noos" <oleg-i@noos.fr> > To: "Pianotech Mailing list" <pianotech@ptg.org> > Sent: Friday, July 18, 2003 4:31 AM > Subject: Re: A string's treatment > > > > It is suggested that you conduct the experiment yourself > if you mark > > the length of a string (marker, tape) tense a 800 N , measure the > > elongation and keep it at that tension for 6 months ore > one year, then > > intense and measure it, if no creep should occur, your > string should > > be back to its original length. > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC