How I read it, you forget to mention the pins in the proposal ! I've done that too before. So it is up to you to correct the thing, you are the expert. Next time you will not take the job without the pins change . Best Isaac OLEG Entretien et réparation de pianos. PianoTech 17 rue de Choisy 94400 VITRY sur SEINE FRANCE tel : 033 01 47 18 06 98 fax : 033 01 47 18 06 90 cell: 06 60 42 58 77 > -----Message d'origine----- > De : pianotech-bounces@ptg.org > [mailto:pianotech-bounces@ptg.org]De la > part de pianolover 88 > Envoyé : vendredi 25 juillet 2003 05:42 > À : pianotech@ptg.org > Objet : cleaning balance rail pins & > > > Hi List, > > Gulbransen Upright circa 1922. Front rail and balance rail > pins are fairly > rusty. Is there a quick way to clean them, kind of in the > same way as the > tuning pin cleaner thingees you put on the end of a drill? > I assume those > would be a bit too large for this job? I hope there is a > faster alternative > to cleaning them INDIVIDUALLY, by hand! Customer is at his > monetary limit > for repairs to the action, so replacing them is NOT an option. > Thanks for your wisdom. > > > Terry Peterson > > _________________________________________________________________ > MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. > http://join.msn.com/?page=features/virus > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC