One can get heat shrink Teflon Tubing. There is one size that will just slip over wippen springs and stay snug after you have "shrunk" it with a heat gun. This is a good fix for S&S wippens that have had the "GOOP" put into the balancier spring slot and isn't easily removed. <G>The only person, I know, who may have the info of where to get it, is Ed McMorrow, (of "Light Hammer" fame), in Seattle. He's a PTG RPT, so his number, etc. is in the Directory. Best Regards, Joe Garrett, RPT, (Oregon) Been There, Didn't Like It, So I'm Here To Stay! [G}
This PTG archive page provided courtesy of Moy Piano Service, LLC