{regarding single hitch pin for each string..................... I can think of only a few reasons for continuing this stringing practice: -- It looks pretty. -- It is Tradition. -- The pianomaker has way too much time on his hands. Del Another consideration is that you can change the gauge of all three strings of any note. Another advantage is you can get the exact angle from the hitchpin to the back termination you want. And I have always wanted to ask, was it ever a consideration in the factory process? With single hitch pins for each string the exact length of string is known and can be "pre fabed" so to speak and might make the stringing procedure faster. A disadvantage might be the increased number of holes for the increased number of hitch pins might weaken the ----rm
This PTG archive page provided courtesy of Moy Piano Service, LLC