Hi List, I found that with a little bit of experimenting, mine works fine. It came with extra plates for the friction areas, and I haven't had to use them yet. Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "gordon stelter" <lclgcnp@yahoo.com> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, June 27, 2003 3:32 PM Subject: Re: Looper - Production Model > Hi Joe, > I bought one of the supply house clones (?) of > your most excellent gadget. And the last time I saw a > piece of this worthless !#*@!, it was the aluminum > base.... which made a very nice sanding block ( after > I had flattened it on plate glass and w&D paper ) to > wrap w&d sandpaper around to get in tight corners. > Presuming that I can find the other pieces, is it > worth trying to modify it so that it will work ( and > how ?) or should I just put them in the scrap metal > bin, and try to build one like yours, from scratch. > Thump > > P.S. Are you "able" to make these for us, yourself? > > --- Joseph Garrett <joegarrett@earthlink.net> wrote: > > > > Well, my dufuseness struck again...I sent the first > > scans to the wrong > > site! > > Yikes! Here is the Production Model, that we > > supplied, originally. In > > the > > scan, there are two "cranks"/"hooks". The middle one > > is the one I > > prefer, > > but the other one will work, it's just a bit more > > difficult to work > > with. > > The other problem with the "Rip Off", is that the > > friction mechanism is > > not > > right. Those parts need to be made out of extremely > > HARD steel. And, > > the Set > > Lever needs to be case hardened so that the face > > doesn't deform and > > wear out > > rapidly. If the Set Lever is too soft, the thing > > will distort the > > threads > > and then you've got a real mess. > > Hope this clarifies the problems. > > I'll resend the scan of the Prototype. > > Joe Garrett, RPT, (Oregon) > > > > Been There, Didn't Like It, So I'm Here To Stay! [G} > > > > > > [Photo at:] > > > > > https://www.moypiano.com/ptg/files/attachments/21/77/fe/29/hphphp17.jpg > > > > [Alternate URL:] > > > > http://tinyurl.com/f7m1 > > > > _______________________________________________ > > pianotech list info: > https://www.moypiano.com/resources/#archives > > > __________________________________ > Do you Yahoo!? > SBC Yahoo! DSL - Now only $29.95 per month! > http://sbc.yahoo.com > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC