This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I might need to glue a buzzing rib today on a Yamaha GH1. If the buzz = source is a rib, the rib is not loose enough to insert anything between = the rib and the panel. The only thing I can think of doing would be to = wick some thin CA in between the rib top and panel bottom. But how in = the world can that be done on a grand in a home with a nice floor = without flipping it over? Any ideas? Thanks. This is my IRATE customer from last week. I am going to take Ron N.'s = advise and exhaust the possibility of a penny or paper clip on the panel = first (I've got my lights and mirrors and search-sticks). And believe it = or not, she can't be there again - YIKES! Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/10/77/65/d8/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC