The problem I have with impact hammers is that I can't feel what the pin is doing. The biggest leap in tuning stability for me came when I learned to feel the pin movement in my fingers through the lever--something I think every tuner should strive for. I find that the impact hammer takes away the tactile part of tuning. David Love davidlovepianos@earthlink.net > [Original Message] > From: Robert G. Kelly <RGK@Pianotuner.com> > To: Pianotech <pianotech@ptg.org> > Date: 11/25/2003 5:21:30 PM > Subject: Re: Impact tuning hammer.....wanted. > > The reason I gave up on the impact hammer has more > to do with "teaching an old dog new tricks" than anything > else. I didn't want to go back to the earlier part of the > learning curve when I could use my old faithful to get the job > done quickly and efficiently. What finally caused me to set > the impact aside was 1.) the discovery of the ball end type on a > steel shaft (ugly to look at but oh so comfortable to use and 2.) > an aching in my wrist after using the impact for a time. It gave me > carpal tunnel fears. > > > I'm not sure what percentage of tuners use an impact hammer but it seems > to > > be pretty low. This has always surprised me because I feel an impact > > hammer is quicker and more efficient and less tiring than using a > > traditional lever. It makes me wonder why the person on this list is > > selling theirs? > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC