This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment HTML MessagePianotek sells Bolduc glue. Terry Farrell ----- Original Message -----=20 From: David M. Porritt=20 To: pianotech@ptg.org=20 Sent: Thursday, November 27, 2003 11:09 AM Subject: Glue OK, I know I'll get flamed by some but I have a brand new flame suit = so I'm safe. =20 Where can I find some good glue for hammers? I'm tired of using hot = hide glue. It's fussy! If you use it straight it jells before you get = the hammer in its final position. If you use to much additive it is = weak. It gets moldy between uses. I still get loose hammer heads even = when doing it right. As far as I can tell none of the current factories = use hide glue for hammers and I don't find loose hammer heads on them. = I know Andre has some glue listed on his web site, but it's not = available here. =20 Suggestions? dave __________________________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, TX 75275 =20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2b/81/4a/85/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC