kimball advice

[Alpha88x@aol.com]

---------------------- multipart/alternative attachment
greetings

             I serviced a Kimball spinet not too long ago that the hammers 
"bubbled"/bounced off the strings when you went to strike a key, there was no 
let off. It was worse in the treble than the bass. Here, the let off rail was 
loose. it was more loose in the treble than the bass. The let off rail's support 
brackets had slipped out of their screws. The solution was to slip the rail's 
support brackets back under their respective screws (about 6 or 8 of them) 
and tighten them. After that the let off was just fine and no more bubbling 
occurred.

Julia Gottchall,
Reading, PA  


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1c/62/28/3f/attachment.htm

---------------------- multipart/alternative attachment--