This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi, If you check locally with either the Woodcraft store or the Rockler = store they should be able to direct you to a place. They probably will = be pretty pricey for a custom grind. If not, get to me and I will look = up in my woodwork magazines for you. Jim James Grebe Piano-Forte Tuning & Repair Artisan of Wood WWW.JamesGrebe.com 1526 Raspberry Lane Arnold, MO 63010 pianoman@accessus.net ----- Original Message -----=20 From: D.L. Bullock=20 To: PTG=20 Sent: Wednesday, April 21, 2004 11:05 PM Subject: Making flange rail Does anyone know where I can find a router or shaper bit for making = the rail that fits the standard piano flange? I really have needed one = several times recently. D.L. Bullock St. Louis www.thepianoworld.com=20 Piano World=20 2732 Cherokee=20 Saint Louis MO 63118 314-772-6676 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/63/f9/b5/3a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC