Making flange rail

[gordon stelter]

I had to make a crown molding for a 6 foot tall Regina
music box recently. I sent a sample of the old molding
to a place that custom makes knives. The knives came
back and I took them to a local cabintet shop that had
the appropriate machine. Presto: 20 feet of crown
molding!
     Thump


--- James Grebe <pianoman@accessus.net> wrote:
> Hi,
> If you check locally with either the Woodcraft store
> or the Rockler store they should be able to direct
> you to a place.  They probably will be pretty pricey
> for a custom grind.  If not, get to me and I will
> look up in my woodwork magazines for you.
> Jim
> James Grebe
> Piano-Forte Tuning & Repair
> Artisan of Wood
> WWW.JamesGrebe.com
> 1526 Raspberry Lane
> Arnold, MO 63010
> pianoman@accessus.net
>   ----- Original Message ----- 
>   From: D.L. Bullock 
>   To: PTG 
>   Sent: Wednesday, April 21, 2004 11:05 PM
>   Subject: Making flange rail
> 
> 
>   Does anyone know where I can find a router or
> shaper bit for making the rail that fits the
> standard piano flange?  I really have needed one
> several times recently.
>   D.L. Bullock    St. Louis
>   www.thepianoworld.com 
> 
>   Piano World 
> 
>    2732 Cherokee 
> 
>   Saint Louis MO 63118
> 
>   314-772-6676
> 
> 



	
		
__________________________________
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25¢
http://photos.yahoo.com/ph/print_splash