Advice on softening rock-hard hammers, please.

[Joe And Penny Goss]

Hi Gordon,
They ( Mine ) are just a click away on my site below<G>
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "gordon stelter" <lclgcnp@yahoo.com>
To: "Pianotech" <pianotech@ptg.org>
Sent: Sunday, August 01, 2004 1:46 PM
Subject: Advice on softening rock-hard hammers, please.


> Dear list,
>     I am about to attempt softening some
> metallic-sounding hammers on a "rebuilt" Chickering
> 1908 grand in a church. Much talk here recently has
> been on squeezing with pliers, which I would like to
> try, but not much specific information has been
> provided on where, and how, this should be done. {
> Please help me with this information. )
>    I would also appreciate some opinions and
> guidelines regarding the "hammer softening" liquid
> which Pianotech sells.
>     Your advice would be gratefully appreciated,
> 
>      Sincerely,
>      Gordon
> 
> 
> 
> 
> __________________________________
> Do you Yahoo!?
> New and Improved Yahoo! Mail - 100MB free storage!
> http://promotions.yahoo.com/new_mail 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives