Advice on softening rock-hard hammers, please.

[Joe And Penny Goss]

Hey Richard, You did not mention ear piercing!
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Richard Brekne" <Richard.Brekne@grieg.uib.no>
To: "Pianotech" <pianotech@ptg.org>
Sent: Sunday, August 01, 2004 4:47 PM
Subject: Re: Advice on softening rock-hard hammers, please.


> Joe And Penny Goss wrote:
> 
> >Hi Gordon,
> >They ( Mine ) are just a click away on my site below<G>
> >Joe Goss RPT
> >Mother Goose Tools
> >  
> >
> http://www.mothergoosetools.com/other_tools/voicing_pliers.shtml
> 
> Grin.... its your all in one tool !!  Tighten key leads... 
> underleverleads,  loosen up hammers,  ... put a dent in near said 
> anything... a regular Squeeze all !
> 
> anon
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives