Advice on softening rock-hard hammers, please.

[Carl Meyer]

----- Original Message ----- 
From: "Joe And Penny Goss" <imatunr@srvinet.com>
To: "Pianotech" <pianotech@ptg.org>
Sent: Sunday, August 01, 2004 4:12 PM
Subject: Re: Advice on softening rock-hard hammers, please.


> Hey Richard, You did not mention ear piercing!
> Joe Goss RPT

Men who have their ears pierced are better suited for matrimony than others.
For 2 reasons.

1:  They've felt pain

2:  They've bought jewelry


Carl Meyer Ptg assoc
Santa Clara, Ca.




> Mother Goose Tools
> imatunr@srvinet.com
> www.mothergoosetools.com
> ----- Original Message ----- 
> From: "Richard Brekne" <Richard.Brekne@grieg.uib.no>
> To: "Pianotech" <pianotech@ptg.org>
> Sent: Sunday, August 01, 2004 4:47 PM
> Subject: Re: Advice on softening rock-hard hammers, please.
>
>
> > Joe And Penny Goss wrote:
> >
> > >Hi Gordon,
> > >They ( Mine ) are just a click away on my site below<G>
> > >Joe Goss RPT
> > >Mother Goose Tools
> > >
> > >
> > http://www.mothergoosetools.com/other_tools/voicing_pliers.shtml
> >
> > Grin.... its your all in one tool !!  Tighten key leads...
> > underleverleads,  loosen up hammers,  ... put a dent in near said
> > anything... a regular Squeeze all !
> >
> > anon
> > _______________________________________________
> > pianotech list info: https://www.moypiano.com/resources/#archives
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives