At 12:43 8/5/2004 -0600, you wrote: >Could anyone out there confirm the metric center pin size in inches> They >seem to all be smaller than what we use here in the states. >The #25 is 1.500mm or .049 inches - that is our #19 >the 325.5 is 1.525mm or .050 inches - our #20 >Joe Goss RPT >Mother Goose Tools Yo Mama, My Kawai and confirmed by Renner Hauptkatalog 891 charts say that: #25 = 1.5mm = .0591 or only .001 larger than US size #25 #25.5 = 1.55mm = .061 bitte... Conrad Hoffsommer - Music Technician Luther College, 700 College Dr., Decorah, Iowa 52101-1045 Vox-(563)-387-1204 // Fax (563)-387-1076 The shortest distance between two points is under construction.
This PTG archive page provided courtesy of Moy Piano Service, LLC