Humm, Thanks Conrad, where can I get this chart? Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Conrad Hoffsommer" <hoffsoco@martin.luther.edu> To: "Pianotech" <pianotech@ptg.org> Sent: Thursday, August 05, 2004 12:47 PM Subject: Re: Does any body really know__ what__ time it is Metric pins > At 12:43 8/5/2004 -0600, you wrote: > >Could anyone out there confirm the metric center pin size in inches> They > >seem to all be smaller than what we use here in the states. > >The #25 is 1.500mm or .049 inches - that is our #19 > >the 325.5 is 1.525mm or .050 inches - our #20 > >Joe Goss RPT > >Mother Goose Tools > > Yo Mama, > > My Kawai and confirmed by Renner Hauptkatalog 891 charts say that: > #25 = 1.5mm = .0591 or only .001 larger than US size #25 > #25.5 = 1.55mm = .061 > > bitte... > > > > > Conrad Hoffsommer - Music Technician > Luther College, 700 College Dr., Decorah, Iowa 52101-1045 > Vox-(563)-387-1204 // Fax (563)-387-1076 > > The shortest distance between two points is under construction. > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC